Light Emitting Diode (LED) model for ICAP/4 Intusoft

Home Forums General Electronics Optical Circuits Light Emitting Diode (LED) model for ICAP/4 Intusoft

This topic contains 5 replies, has 0 voices, and was last updated by  voutanio77 5 years, 8 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #16303

    voutanio77

    Hi,
    Can anyone send me Light Emitting Diode (LED) model for ICAP/4 Intusoft? Any model will be fine.

    #16426

    ELEKPAUL
    Participant
    Credits: 4

    hello,

    you can replace the LED with a diode, or import into ICAP/4 a model like this

    .MODEL RED_LED D (IS=5.55f RS=2.2975 N=2.33 BV=4 IBV=10U CJO=2.97P VJ=.75 M=.333 TT=4.32U)

    #16429

    voutanio77

    Thank you very much!

    #16454

    Anonymous

    Hi every one,
    Can someone send me a project with a red led diode, because i don’t have the symbol of this component.
    It must be from someone that uses ICAP/4.
    I failed to create one with the model below
    .MODEL RED_LED D (IS=5.55f RS=2.2975 N=2.33 BV=4 IBV=10U CJO=2.97P VJ=.75 M=.333 TT=4.32U)

    #16455

    ELEKPAUL
    Participant
    Credits: 4

    Hi,

    add the file redled.lib in the directory c:spice8pr

    run SpiceNet, from “File” menu select Update Part Database…

    you should receive the message with no errors

    from “Parts” menu select Parts Browser…

    you should see the component REDLED under Diodes Part Type

    click on “Place” to use the component

    below a simple example. The voltage drop is about 1.8V and the current about 20mA.

    #16456

    voutanio77

    Thank you for your reply.
    I know how to create a model the problem was the symbol of the led diode on schematics. I wanted the diode with the arrows.  Anyway i found a way to create the symbol but if you find the version (diode with arrows) i would appreciate it.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.