> Motor Control Circuits

Projects

Motor Control Circuits

This category is dedicated to SPICE simulation projects of Motor Drives, Speed Controllers, Direction Controllers, Servo Motor, Microcontrollers circuits for Stepper Motors, etc

Sort by

  • Half-/Full-bridge N-channel power MOSFET drivers

    Created by LTspiceDesigner, published on 24-01-2014

    The LT1160 top driver can drive the N-channel power MOSFETs operating off a high voltage rail of up to 60V. The adaptive protection against shoot-through currents eliminates matching requirements for the two MOSFETs. the LT1162 is the dual version suitable for full bridge motor control.

    FREE

    (only to registered users)

    Project Type: Free

    Complexity Spice Software Software Version Full version Components number
    Simple LTspice IV No 11-20

    Path: SPICE Projects > General Electronics > Motor Control Circuits

  • Three-Phase Brushless DC Motor Driver

    Created by CadenceDesigner, published on 20-01-2014

    SPICE simulation, PCB layout and 3D model of a 3-phase brushless DC motor driver. The 3-phase power stage is composed of six power transistors, 2 PNP MJE2955 and 2 NPN MJE3055.

    FREE

    (only to registered users)

    Project Type: Free

    Complexity Spice Software Software Version Full version Components number
    Advanced PSpice 16.5+ Yes 51-100

    Path: SPICE Projects > General Electronics > Motor Control Circuits

  • Stepper Motor forward-reverse drived by 80C51

    Created by czyzzm84, published on 07-10-2013

    the stepper motor is drived by the microcontroller by means of a darlington arrays ULN2003. 3 buttons control respectively forward spin, reverse spin and stop.

    FREE

    (only to registered users)

    Project Type: Free

    Complexity Spice Software Software Version Full version Components number
    Simple Proteus 7+ Yes 11-20

    Path: SPICE Projects > General Electronics > Motor Control Circuits

  • PWM Driver DC Motor Circuit

    Created by CadenceDesigner, published on 11-08-2013

    PWM driver model for DC motor implemented with a LM324 used as comparator, a photocoupler PS2501 and a couple of high speed, high current N-channel power mosfet, a 2SK2741 and a 2SK3405.

    FREE

    (only to registered users)

    Project Type: Free

    Complexity Spice Software Software Version Full version Components number
    Intermediate PSpice 16.5+ No 11-20

    Path: SPICE Projects > General Electronics > Motor Control Circuits

  • stepper motor control with PIC 16F887

    Created by yakoonettari23, published on 03-12-2012

    choose an angle by the botton 1( the angle shown in LCD screen) then press the botton 2 to validate your choice.

    FREE

    (only to registered users)

    Project Type: Free

    Complexity Spice Software Software Version Full version Components number
    Intermediate Proteus 7.6 Yes <10

    Path: SPICE Projects > General Electronics > Motor Control Circuits

  • Stepper Motor Drived by a Control Unit

    Created by EETACcataluna, published on 11-11-2012

    The control unit of stepper motor consists of 3 inputs and 4 outputs, INH that enables/disables the motor if low/high, CW that turns the motor clockwise/anticlockwise if high/low, and the CLOCK. The four outputs of the control unit drive the ULN2003A power driver accordly to the two phase drive sequence.Whole process of control unit design.

    FREE

    (only to registered users)

    Project Type: Free

    Complexity Spice Software Software Version Full version Components number Documents
    Intermediate Proteus 7+ Yes 51-100 1

    Path: SPICE Projects > General Electronics > Motor Control Circuits

  • Stepper Motor Controlled by AT90S2313

    Created by EDWin2011, published on 05-11-2012

    The speed of the stepper motor is directly proportional to the pulse width, by controlling the pulse width, the speed can be controlled. We can control the speed of the stepper motor by reducing the delay of each sequence. This project uses a AT90S2313 microcontroller 2 display drivers for driving display units and 2 displays for displaying the sequence.

    FREE

    (only to registered users)

    Project Type: Free

    Complexity Spice Software Software Version Full version Components number Documents
    Intermediate EDWinXP 1.61+ No <10 1

    Path: SPICE Projects > General Electronics > Motor Control Circuits

  • Servo Motor with Rate Feedback

    Created by ICAP4Designer, published on 24-10-2012

    SPICE simulation of a servo motor coupled to a sensor for rate feedback, through a reduction gearbox. The gear ratio is set to 0.05.

    FREE

    (only to registered users)

    Project Type: Free

    Complexity Spice Software Software Version Full version Components number
    Advanced ICAP/4 8.3.11+ No 21-30

    Path: SPICE Projects > General Electronics > Motor Control Circuits

  • Arduino Motor Driver with L293

    Created by joserami, published on 29-09-2012

    Proteus simulation of a bipolar stepper motor driven by Arduino with a L293, in this project a ramp function allows an acceleration in a given number of steps to the speed previously set.

    FREE

    (only to registered users)

    Project Type: Free

    Complexity Spice Software Software Version Full version Components number
    Simple Proteus 7.7+ Yes <10

    Path: SPICE Projects > General Electronics > Motor Control Circuits

  • PWM Motor Controller with Motorola MC68HC11A8

    Created by ProteusDesigner, published on 26-02-2012

    the anologic to digital converter channels of microcontroller are used to measure the input signal and generate the PWM drive signals. A darlington bridge allows the motor to be driven in either direction.

    FREE

    (only to registered users)

    Project Type: Free

    Complexity Spice Software Software Version Full version Components number
    Intermediate Proteus 7.7+ Yes 21-30

    Path: SPICE Projects > General Electronics > Motor Control Circuits

Pag. 1 of 2 (15 projects found)

1 | 2 |